Siser - Easyweed Textile

EasyWeed for sale in linear meter with width of 12 inches. Textile vinyl ideal for Silhouette CAMEO, Cricut or Sizzix cutting plotters.

It is the #1 material and the most sold by Siser since it is very easy to cut it, stamp it and combine different colors in the same design.

Its main advantage is that this material is applied at a lower temperature, it can even be applied with a home iron, it allows hot or cold hair removal. It's also extremely durable wash after wash and uses a lower pressure print setting.

EasyWeed is thinner than other brand materials due to its polyurethane-based construction and offers a one-step application that is ideal for multiple coats. The material is so sensitive to cutting and its liner allows it to be used for detailed designs. EasyWeed is CPSIA certified, so it's perfect for decorating children's clothing and accessories.

• Linear meter with width of 12″ inches

• 100% Cotton
• 100% Polyester without Coating
• Polyester and Cotton Blend
• Fur or Leather

• Time: 10-15 Seconds
• Temperature: 150°C / 305°F
• Pressure: Average
• Shaving: Hot or Cold
• Iron: Homemade or Professional

• Do not dry clean
• Wash with warm or hot water
• Low detergent
• Suitable for tumble drying on normal cycle
• Do not use bleach or other chemicals
• Wait 24 Hrs after printing to wash
• Wash inside out

• Polyurethane Composition
• Pressure sensitive liner
• Semi-gloss finish
• 90 Microns / 3.5 Mils
• It is cut with a 45° / 60° knife
• Can be applied in layers

• + 30 Washes

• The vinyl must be cut from the bottom side in a “mirror” mode.
• Perform a test cut and/or blade pressure adjustment before cutting the material.
• If the blade/blade cuts through the vinyl and clear liner, it means there is too much pressure on the blade (only the vinyl or top material should be cut).
• Designs must be cut with a 45 degree blade/razor.
• It is easier to remove the EasyWeed on the base of the hot iron or on the hot surface.
• To layer colors, each color can be ironed for a single second and the last color is ironed for 10 seconds.
• It is important not to apply the material over some coated polyester textiles, as this will cause the vinyl not to adhere to the fabric. In this case, the fabrics will have to be washed to remove this chemical coating.

• Blade / Razor: Regular, 3
• Material Configuration: Thermal Transfer
• Material Type: Smooth
• Speed: 8
• Width: 6

• “Mirror” cut
• Epilate hot or cold.
• Place the vinyl on the textile.
• Cover the vinyl with a Teflon sheet or household wax paper.
• Use firm pressure. For 10 seconds cover the entire image with the iron. DO NOT SLIDE THE PANCHA.
• Remove the clear liner from the vinyl.
• Cover design with Teflon sheet or wax paper again and iron again for 5 to 10 seconds.
• Wait 24 hours before washing the garment.